Bayable

Migrating from another system

The plan for moving a facility or a whole company to Bayable – subdomain first, loaders with a dry run, website and pictures, your domain, cards on file – and every loader's columns with sample data.

The plan

  1. Start on your Bayable address. Your account is live at yourname.bayable.com the moment it exists. Your current system keeps running; nothing changes for tenants.
  2. Export from the old system. Most systems export tenants, units, leases/rentals, invoices/charges, payments and notes as CSV or Excel. Export everything you can, including past tenants and old invoices – history is cheap to load and expensive to lose.
  3. Download the templates (Corporate settings → Data → Every template, Excel + CSV): an Excel workbook per loader – an Instructions sheet with every column explained, and a Data sheet with dropdowns for the choices and yes/no columns, date and number checks so the wrong kind of value can't be typed, and sample rows – plus the same as CSV and this guide as a README. Fill each from the old export (paste the old system's columns under the template's headers); column names are explained below.
  4. Check only, then load. Each loader runs as a dry run first. The report starts with a summary – rows ready, rows with problems, notes – and lists each problem with its row number as in your file, the column, what it found, why that's wrong and how to fix it ("Row 7, Move-in: “13/45/2024” isn't a date. Use YYYY-MM-DD (2026-03-15), MM/DD/YYYY or an Excel date cell."), the same problem on many rows once ("Rows 4–19 …"). Download the file with the problems marked gives it back as Excel with the cells to fix in red. Fix, check again, then load. A file is all-or-nothing, and loading the same file twice updates rather than duplicates, so a fresh export the night before you switch is one more load, not a redo.
  5. Website and pictures, then your domain, then cards on file. Each has its own section below.
  6. Check the numbers: the Rent Roll and Aging reports should match the old system to the cent before you switch billing over.

On Enterprise, we do this with you: send us the exports and we come back with the dry-run reports.

Or have Bayable load it – $299

The third choice on the first step of the setup (Have Bayable load it), and under Corporate settings → Data afterwards. You skip the loaders altogether: tell us what software you use today, your website and admin addresses, and a user you create for us in that system – full access, with multi-factor sign-in turned off for that user – and agree to the one-time $299 fee (invoiced to your Bayable account; billing-exempt accounts aren't charged). Bayable's crawler then signs in with that user and reads your system the way a careful person would – page by page, read-only: nothing is clicked, nothing is changed, no logout, delete, edit or send link is ever followed – and collects every piece of information it holds: your corporate details, locations and facilities, space types and prices, spaces, tenants and their notes, rentals current and past, invoices, payments and credits, gate codes, products, message history, plus any CSV or Excel export the pages link to. That becomes one JSON bundle, which our team checks against the loaders (a dry run first), fills in by hand where the old system's pages were unusual, pushes for real, and hands to you to review.

If your old system keeps browsers out, or you have API access. Some systems put a "verify you are human" check in front of the sign-in; Bayable never clicks through one. Then our team either works from your system's own export files – you sign in, download its exports (tenants, units, rentals, invoices, payments, notes) and send them – or, for Storable storEDGE and SiteLink, pulls the data straight through that system's API with keys you get from the vendor (storEDGE: an API access ID, secret key and your facility ID under Corporate → Settings → API; SiteLink: an API user under Corporate Control → API Users and Rights). The API pull only reads – nothing is changed in your old system – and your keys are stored encrypted and removed when the migration is done.

Your website comes across too. Bayable's crawler reads your current website page by page – nothing is signed in to, nothing is clicked – and pulls what the website builder needs: your logo, your colours, the headline and the text under it, the about text, the features, the FAQs, the testimonials, the photos, the footer line, the search-engine text, your social profiles, the phone, email, address and hours, and the pages beyond the home page – terms & conditions, privacy policy, blog posts, anything else with real text. Our team then sees it next to what you entered in the forms, field by field, picks what to bring over, and loads it into the website builder's draft – nothing goes live until you look it over in the builder and press Publish.

You get an email when it's ready. Under Corporate settings → Data you see what was loaded (so many tenants, so many spaces…) with links to look through it, and two buttons: It's right – approve or Send it back with a note of what's wrong. Nothing is final until you approve it, and we fix anything you flag. The password you leave is stored encrypted; every time a Bayable staff member looks at it, the look is written to your Activity Log. Delete that user in the old system once you've approved the load.

Try it with the sample data first

The templates' sample rows (refs starting with SAMPLE-, shaded in Excel) are a small two-facility company with every kind of record – every space category, individuals and a business, rentals current, past due, moved out and reserved, a promotion, protection plans and own policies, both billing cycles, each payment method. Loaded in order into a test facility they show exactly where everything ends up. Delete them before you fill in your own data – the check points out any left in.

Where the loaders live

Owners: Corporate → Corporate settings → Data → Bringing data in. Each loader has its columns listed, a template, a Check only and a Load button, and the report of every run (also under the Activity Log). Bayable staff can run the same loaders for your account from their side.

New facility, extra facility, or a whole company

  • A new account starts with one facility: load its space types, spaces and tenants into that facility.
  • An extra facility for an existing company: the Facilities loader creates it (or add it under All facilities), then the other loaders use its name or ref in their facility column.
  • A whole corporate: one Facilities file with every location, then every other file with a facility column saying which. One load each.

Money in the tenant's favour: account credit or prepaid rent

Old systems often show one "credit balance". Bayable keeps two kinds apart, because only one of them belongs to the tenant:

Account creditPrepaid rent (money on account)
What it isGoodwill, a refund owed as credit, a transfer remainderRent the tenant paid ahead
Pays the next billsYes, as each bill is issuedYes, as each bill is issued
Can be refundedNoYes – what's left is the tenant's (cash and checks at the counter)
How to load itAccount credits & prepaid rent, kind = creditAccount credits & prepaid rent, kind = prepayment (or a Payments row with no invoice)

A row with no kind loads as account credit, and the check says so. Only the remaining part is loaded. Either kind pays the tenant's open bills as soon as it's loaded and every bill after that the day it's issued, so a prepaid tenant gets no late fee, notice or lock-out. The tenant's ledger shows it, and a prepayment can be refunded from the tenant's page like any money on account.

With the one-step JSON import (Import data), a lease's balanceCents is only what the tenant owes; put money in their favour in prepaidCents (prepaid rent) or creditCents (account credit).

Bill dates and times

  • Next bill. A rental is billed from its next_bill date, or the day after paid_through when that's blank. An active rental needs one of the two. On anniversary billing it keeps that day of the month: a rental billed on the 31st is billed on the last day of shorter months and on the 31st again after them, never drifting to the 28th. Each rental keeps the facility's billing cycle as its own, so changing the facility's billing later applies only to new move-ins.
  • Times are the facility's. A date-time without an offset (2026-11-01 00:30) is read on the facility's own clock, so a payment just after midnight lands on that day (and that month) in close of day, the cash reports and tax collected – wherever our servers are. A full ISO time with an offset (2026-11-01T05:30:00Z) is taken as it is, and a date alone is noon at the facility.
  • Past rentals (status ended) are moved-out rentals here: they show on the tenant's history and the Movement report, and a balance left on one can be written off.
  • Gate access. A tenant with a gate code and a current rental gets access at that facility when the rental is loaded – unless the files show them past due (open invoices past their due date, at least the smallest past-due amount) or locked out in the old system (gate_locked = yes on the rental). Then the code stays off until they pay, exactly as for a tenant the late-payment schedule locked out here: the payment that clears it switches the code back on.
  • Deposits, plans, promotions, rent changes. A rental's deposit_held is held for the move-out like a deposit paid here; insurance_plan puts the rental on one of the facility's protection plans (set them with the Facilities file's insurance_plans); promotion with promo_months_left keeps a move-in special running; new_rent + new_rent_from schedules a rent change already announced in the old system.
  • Loading again after go-live. Anything the app has done since a row was loaded stays as it is: a rental already billed here, an invoice with a late fee, credit or payment added here, a payment or credit used or refunded here. The load report lists those rows as skipped.

Bring a facility (or a whole company) over from any other system with a handful of spreadsheets: one file per kind of object, each with a header row and one row per record. Download the templates – an Excel workbook per loader (an Instructions sheet explaining every column, and a Data sheet with dropdowns for every choice and yes/no column, date and number checks, and sample rows) or the same as CSV – fill them from your old system's exports, and load them in the order below. A file can be loaded as many times as you like – a row with the same ref updates the same record, nothing is duplicated – so load, look, fix, load again.

Three rules

  1. Refs tie files together. Every record has a ref: what it was called in the old system (an id, an account number, a code). Later files point at earlier ones by those refs – a rental names its tenant's ref and its space's number, a payment names its invoice's ref. Keep the old ids; don't invent new ones.
  2. Facilities and spaces are matched by name and number, so the facility column can be the facility's ref or its exact name, and a space is "A-12" at that facility.
  3. A load is all or nothing. Use Check only first: every row is checked (types, required columns, refs that must already exist) and the report lists each problem with its row number as you see it in Excel (row 1 = the column names), the column, what was found and how to fix it – the same problem on many rows is listed once ("Rows 4–19, Move-in: …"). A summary on top says how many rows are ready and how many have problems, and the problem rows can be downloaded as an Excel file with the cells to fix in red. Nothing is written until the file is clean. Notes (warnings) don't stop a load.

The sample data

Every template comes with sample rows – a small two-facility company: every space category (lockers, climate controlled and drive-up spaces, wine storage, uncovered / covered / enclosed parking, boat racks, RV parking) in several sizes and prices; individuals and a business with an alternate contact; rentals that are current, past due and locked out, moved out and reserved, on a promotion, on a protection plan or the tenant's own policy, on 1st-of-month and anniversary billing; a payment by each method, account credit and prepaid rent. Their refs start with SAMPLE- (the Excel rows are shaded) and the check notes any that are left in. The sample files load together in order, so you can try the loaders on a test facility first – then delete the sample rows and fill in your own.

The order

  1. Facilities (corporate)
  2. Space types – after Facilities (corporate)
  3. Spaces – after Space types
  4. Promotions – after Space types
  5. Tenants – after Facilities (corporate)
  6. Rentals (current and past) – after Tenants, Spaces, Promotions
  7. Vehicles & boats – after Tenants
  8. Invoices (history) – after Rentals (current and past)
  9. Payments (history) – after Invoices (history)
  10. Account credits & prepaid rent – after Rentals (current and past)
  11. Tenant notes – after Tenants
  12. Gate codes (vendors & shared) – after Facilities (corporate)
  13. Merchandise products & stock – after Facilities (corporate)
  14. Merchandise sales (history) – after Merchandise products & stock
  15. Message history – after Tenants
  16. Card-on-file (Stripe mapping file) – after Tenants, Rentals (current and past)

Dates are YYYY-MM-DD, MM/DD/YYYY or an Excel date cell; date-times are YYYY-MM-DD HH:MM (24-hour, the facility's time zone), an Excel date-time or full ISO. Money is in dollars (125, 133.75, $1,250.00); yes/no columns take yes/no (or true/false, 1/0); a choice can be its value or its label ("Uncovered parking" for parking). In a CSV, text with commas goes in quotes. Excel files are read from their Data sheet; JSON is accepted too: an array of objects with the same column names.

Gate access

A tenant with a current rental and a gate code gets gate access switched on at that facility when the rental is loaded – unless the files say they're past due or locked out: the rental's gate_locked is yes, or open invoices loaded for their current rentals there are past their due date and add up to the facility's smallest past-due amount. Then the code stays off until they pay, through the normal rules: the rental is recorded as locked out the way the nightly late-payment run records it, so the payment that clears what's past due switches the code back on (and an invoice or payment file that shows the bills paid opens it too). Access that staff changed here is never touched by a later load.

What the loaders added on Oct 31, 2026

  • Facilities: the money settings – admin, reservation and returned-payment fees, the smallest past-due amount, sales tax on merchandise and on lien sales, the tax line label, which payment methods the office takes, security deposits, tax-exempt tenants, prepay discounts, refund of unused days, promises to pay, notice days, and the facility's protection plans.
  • Space types: the security deposit for each type.
  • Promotions (new loader), and on Rentals: the promotion a rental is still getting (and the months left), the protection plan it's on (and an older price), the deposit held, a rent change already announced (new rent and the first day of its billing period) and gate_locked.
  • Tenants: an alternate contact and a sales-tax exemption certificate (number, state, expiry).
  • Card-on-file: an optional rental, when only one rental's autopay should use the card.

Left out on purpose: prepay terms bought in the old system (load the money as prepaid rent – Account credits & prepaid rent, kind prepayment; the discount was already given there), open promises to pay (they last days – enter them here), and staff, passwords and card numbers (never imported).

Historical data

Past rentals go in Rentals with status ended and a move-out date – they show on the tenant's history and on the Movement report. Past invoices and payments go in Invoices and Payments, one row each; the ledger shows them exactly as they were, including what's still open. Credits tenants carry over go in Account credits & prepaid rent: kind=credit for account credit (used on bills, not refundable), kind=prepayment for rent paid ahead (money on the account – it pays bills and can be refunded). Old messages go in Message history so the conversation carries over. Notes go in Tenant notes.

Card-on-file (autopay)

Card numbers can't be copied between payment processors by anyone but the processors themselves. The way it works:

  1. Ask the old processor (for storEDGE this is usually Storable Payments) for a card data export to Stripe. Stripe's migrations team arranges the secure transfer with them; nothing passes through you or Bayable.
  2. Stripe imports the cards and returns a mapping file: each old customer id with its new Stripe customer and payment method ids (ask for PaymentMethods, pm_…).
  3. Load that file with the Card-on-file loader. The old customer id must be the tenant's ref (or their email) – if the processor used different ids, add a column to the mapping file first. Each card is attached to its tenant and, for rentals that had autopay in the old system, autopay is switched back on with that card.

Until the transfer is done, tenants can add a card themselves in the portal; autopay turns on as soon as they do.

Facilities (corporate)

The facilities of the company and how each one bills – new ones are created, existing ones (same ref or same name) are updated. A setting left blank keeps what the facility has (a new facility gets the app's default). The company's own details are under the tenant's Overview.

ColumnTypeRequiredWhat goes in itExample
reftextThe facility's id or code in the old system. Blank = the name. Other files name the facility by this ref.FAC-1
nametextyesThe facility's name as tenants see it.Lakeside Storage – Main St
address1textStreet100 Main St
citytextCitySpringfield
statetextTwo letters.IL
ziptextFive digits (or ZIP+4). Keep it as text so a leading 0 stays.62701
phonetextPhone217-555-0100
emailtextThe office mailbox: receipts and replies go here.office@example.com
timezonetext (America/New_York / America/Chicago / America/Denver / America/Phoenix / America/Los_Angeles / America/Anchorage / Pacific/Honolulu / America/Puerto_Rico)IANA name – every time in the other files is read on this clock.America/Chicago
storage_profileenum (vehicle / self_storage / mixed)What the facility rents: it decides the space categories offered and whether vehicle details are asked.mixed
billing_modeenum (first_of_month / anniversary)first_of_month (everyone billed on the 1st, the first month prorated) or anniversary (each rental billed on its move-in day). Changing it later applies to new move-ins; rentals already here keep their cycle.first_of_month
sales_tax_percentnumberOnly where the state taxes storage rent; 0 = none. Up to three decimals (7.375).0
sales_tax_labeltextHow the tax line reads on bills.Sales tax
merchandise_tax_percentnumberLocks, boxes and supplies; 0 = none.8.75
lien_sale_tax_percentnumberCharged to the buyer at a lien auction where the state taxes it; 0 = off.0
admin_feemoneyOne-time fee on the move-in bill; 0 = none.25
reservation_feemoneyCharged when a space is reserved, credited on the move-in bill; 0 = free reservations.0
nsf_feemoneyCharged when a check bounces or a bank debit is returned; 0 = off.30
late_feemoneyThe late fee in the facility's delinquency schedule (0 = no late fee).25
grace_daysnumberDays after the due date before the late fee: 5 = the fee goes on on day 6.5
min_past_duemoneyA rental owing less than this past due gets no notices, late fees or lock-out (cents short don't count).5
accept_cashyes / noStaff may take cash at the counter (card is always on).yes
accept_checkyes / noTakes checksyes
accept_money_orderyes / noTakes money ordersno
accept_achyes / noTakes bank transfer (ACH)yes
security_depositsyes / noCharge a security deposit at move-in (the amount per space type is in the Space types file).no
tax_exempt_tenantsyes / noTenants with an exemption certificate (Tenants file) pay no sales tax while it's valid.no
prepay_tierstextMonths:percent off, separated by commas – e.g. 3:5, 12:10 = 5% off for 3 months paid ahead, 10% for 12. Months 2–36, percent up to 50. Blank keeps the facility's; 0 = none.3:5, 12:10
refund_unused_daysyes / noAt a move-out inside a paid month, give back the days not used.no
promises_to_payyes / noStaff may hold a past-due rental's late fees and lock-out until a promised date.no
promise_max_daysnumber1–60.14
rent_increase_notice_daysnumber0–180.30
move_out_notice_daysnumber0–60.10
insurance_planstextThe facility's own protection plans as name:coverage $:price $ a month, separated by semicolons – e.g. Basic:2000:12; Plus:5000:20. Blank keeps the facility's. The Rentals file names a plan by its name.Basic:2000:12; Plus:5000:20
activeyes / noActiveyes

Sample rows (facilities.csv):

ref,name,address1,city,state,zip,phone,email,timezone,storage_profile,billing_mode,sales_tax_percent,sales_tax_label,merchandise_tax_percent,lien_sale_tax_percent,admin_fee,reservation_fee,nsf_fee,late_fee,grace_days,min_past_due,accept_cash,accept_check,accept_money_order,accept_ach,security_deposits,tax_exempt_tenants,prepay_tiers,refund_unused_days,promises_to_pay,promise_max_days,rent_increase_notice_days,move_out_notice_days,insurance_plans,active
SAMPLE-FAC-1,Lakeside Storage – Main St (sample),100 Main St,Springfield,IL,62701,217-555-0100,main@lakeside-storage.example,America/Chicago,mixed,first_of_month,0,Sales tax,8.75,0,25,0,30,25,5,5,yes,yes,no,yes,yes,yes,"3:5, 12:10",no,yes,14,30,10,Basic:2000:12; Plus:5000:20,yes
SAMPLE-FAC-2,Lakeside RV & Boat – Lake Rd (sample),4800 Lake Rd,Springfield,IL,62702,217-555-0200,lake@lakeside-storage.example,America/Chicago,vehicle,anniversary,0,Sales tax,8.75,0,20,25,30,20,7,10,no,yes,yes,yes,no,no,,yes,no,,45,15,Vehicle basic:5000:15,yes

Space types

Sizes and prices. A space type belongs to a facility and is matched by facility + name.

Load after: Facilities (corporate).

ColumnTypeRequiredWhat goes in itExample
facilitytextyesThe facility's ref or name.FAC-1
nametextyesWhat the type is called on the website and the rent roll.10×10 drive-up
categoryenum (parking / covered / enclosed / slip / unit / interior / locker / other)Decides the picture, the filters and whether vehicle details are asked.unit
width_ftnumberWidth ft10
length_ftnumberLength ft10
height_ftnumberCovered / enclosed / interior.8
pricemoneyyesThe standard monthly rent.109
climate_controlledyes / noClimate controlledno
security_depositmoneyCharged at move-in when the facility takes deposits (Facilities file: security_deposits = yes). Blank keeps the type's; 0 = none.50
descriptiontextShown on the website.Park at the door – furniture, tools, a motorcycle.
activeyes / noActiveyes

Sample rows (unit_types.csv – the first 4 of the template's 14):

facility,name,category,width_ft,length_ft,height_ft,price,climate_controlled,security_deposit,description,active
SAMPLE-FAC-1,5×5 locker,locker,5,5,8,39,yes,0,"Indoor, climate-controlled – boxes, files, seasonal decorations.",yes
SAMPLE-FAC-1,5×10 climate-controlled,interior,5,10,8,75,yes,25,"A walk-in closet's worth, kept at 55–80°F.",yes
SAMPLE-FAC-1,10×10 climate-controlled,interior,10,10,8,139,yes,50,"A one-bedroom apartment, indoors on the 2nd floor (elevator).",yes
SAMPLE-FAC-1,10×10 drive-up,unit,10,10,8,109,no,50,"Park at the door – furniture, tools, a motorcycle.",yes

Spaces

Every space with its number and type. Matched by facility + number. Occupancy comes from the rentals loader, not from here.

Load after: Space types.

ColumnTypeRequiredWhat goes in itExample
facilitytextyesRef or name.FAC-1
numbertextyesWhat's painted on it.D-12
typetextyesThe type's name at that facility (Space types file).10×10 drive-up
pricemoneyBlank = the type's price.
statusenum (available / unavailable)available or unavailable (occupied/reserved are set by rentals).available
floortextSelf storage: 1, 2, G…
notestextNotes

Sample rows (units.csv – the first 4 of the template's 18):

facility,number,type,price,status,floor,notes
SAMPLE-FAC-1,L-01,5×5 locker,,available,1,
SAMPLE-FAC-1,L-02,5×5 locker,,available,1,
SAMPLE-FAC-1,C-101,5×10 climate-controlled,,available,1,
SAMPLE-FAC-1,C-102,5×10 climate-controlled,,available,1,

Promotions

Move-in specials and codes. Matched by facility + name. A rental on a promotion names it in the Rentals file (promotion column).

Load after: Space types.

ColumnTypeRequiredWhat goes in itExample
facilitytextyesRef or name.FAC-1
nametextyesNameSecond month free
codetextWhat a tenant types in; blank = applies by itself online.SAVE10
kindenum (percent / amount / free_months)yespercent off, an amount off, or free months.percent
valuenumberyespercent: 10 = 10% · amount: dollars off a month · free_months: how many months.10
duration_monthsnumberHow many billing months a percent or amount lasts (free months use the value). Blank = 1.3
applies_totextSpace type names separated by semicolons; blank = every type.Enclosed garage 12×40; Covered parking – up to 45′
starts_ondateStarts
ends_ondateEnds
show_on_websiteyes / noOn the websiteyes
new_tenants_onlyyes / noNew tenants onlyyes
max_redemptionsnumberBlank = no limit.
activeyes / noActiveyes
descriptiontextDescription

Sample rows (promotions.csv):

facility,name,code,kind,value,duration_months,applies_to,starts_on,ends_on,show_on_website,new_tenants_only,max_redemptions,active,description
SAMPLE-FAC-1,Second month free,,free_months,1,,,,,yes,yes,,yes,Rent a space this month and the second month is on us.
SAMPLE-FAC-1,10% off 3 months,SAVE10,percent,10,3,Enclosed garage 12×40; Covered parking – up to 45′,,,no,no,50,yes,Vehicle storage: 10% off the first 3 months with code SAVE10.
SAMPLE-FAC-2,$25 off the first month,RV25,amount,25,1,,,,yes,yes,,yes,

Tenants

People and businesses. Matched by ref (or email when there is no ref). Passwords are never imported – tenants set one from the portal's “Forgot password”. A business goes in as first name + last name (e.g. Harbor Marine / Services LLC) with its contact person as the alternate contact.

Load after: Facilities (corporate).

ColumnTypeRequiredWhat goes in itExample
reftextyesThe tenant's id or account number in the old system.T-1001
facilitytextyesRef or name.FAC-1
first_nametextyesA business: the first part of its name.Dana
last_nametextyesA business: the rest of its name.Rivera
emailtextTheir portal login and where bills go.dana@example.com
phonetextMobile217-555-0111
sms_consentyes / noThey agreed to get texts.yes
line1textStreet1 Marina Way
line2textApt / unit
citytextCitySpringfield
statetextTwo letters.IL
ziptextZIP62701
drivers_licensetextDriver's license #R123-456-78-900
drivers_license_statetextTwo letters.IL
drivers_license_expiresdateLicense expires2030-05-01
dobdateDate of birth1985-03-15
emergency_nametextEmergency contactEd Rivera
emergency_relationshiptextRelationshipBrother
emergency_phonetextEmergency phone217-555-0122
alt_contact_nametextSomeone else on the account (a business's office manager, a spouse).Lena Ortiz
alt_contact_relationshiptextAlt. relationshipOffice manager
alt_contact_phonetextAlt. phone217-555-0167
alt_contact_emailtextAlt. emaillena@example.com
gate_codetext4–10 digits, unique at the facility; kept as is. With a current rental the code opens the gate once the rental is loaded – unless the rental is past due or locked out (then it stays locked until they pay).482913
tax_exempt_certificatetextOnly for tenants exempt from sales tax (and the facility's tax_exempt_tenants on).IL-E9988-7766
tax_exempt_statetextTwo letters.IL
tax_exempt_expiresdateBlank = doesn't expire.2029-12-31
notestextNotes
created_atdateCustomer since2021-04-01

Sample rows (tenants.csv – the first 4 of the template's 6):

ref,facility,first_name,last_name,email,phone,sms_consent,line1,line2,city,state,zip,drivers_license,drivers_license_state,drivers_license_expires,dob,emergency_name,emergency_relationship,emergency_phone,alt_contact_name,alt_contact_relationship,alt_contact_phone,alt_contact_email,gate_code,tax_exempt_certificate,tax_exempt_state,tax_exempt_expires,notes,created_at
SAMPLE-T-1001,SAMPLE-FAC-1,Dana,Rivera,dana.rivera@example.com,217-555-0111,yes,1 Marina Way,,Springfield,IL,62701,R123-4567-8900,IL,2030-05-01,1985-03-15,Ed Rivera,Brother,217-555-0122,,,,,482913,,,,,2021-04-01
SAMPLE-T-1002,SAMPLE-FAC-1,Sam,Okafor,sam.okafor@example.com,217-555-0133,no,22 Harbor Rd,,Chatham,IL,62629,,,,,Ada Okafor,Spouse,217-555-0144,,,,,,,,,Moved out – prefers email,2022-09-15
SAMPLE-T-1003,SAMPLE-FAC-1,Priya,Shah,priya.shah@example.com,217-555-0155,yes,8 Elm St,Apt 4,Springfield,IL,62704,S555-0101-2020,IL,2028-09-30,1992-11-02,,,,,,,,735102,,,,,2025-02-10
SAMPLE-T-1004,SAMPLE-FAC-1,Harbor Marine,Services LLC,office@harbormarine.example,217-555-0166,no,300 Industrial Pkwy,,Springfield,IL,62703,,,,,Marco Ortiz,Owner,217-555-0168,Lena Ortiz,Office manager,217-555-0167,lena@harbormarine.example,260417,IL-E9988-7766,IL,2029-12-31,Business account – invoices to the office email,2024-05-20

Rentals (current and past)

Who rents which space, for how much and since when – and past rentals with their move-out date. Active rentals mark the space occupied, and a tenant's gate code opens the gate at that facility – unless the rental is past due or was locked out (it stays locked until they pay). Matched by ref, or tenant + space + move-in date.

Load after: Tenants, Spaces, Promotions.

ColumnTypeRequiredWhat goes in itExample
reftextThe rental's id in the old system (blank = tenant + space + move-in).L-5001
tenanttextyesThe tenant's ref (or email).T-1001
facilitytextyesRef or name.FAC-1
unittextyesSpace numberD-12
statusenum (active / ended / reserved)active, ended (moved out) or reserved.active
rentmoneyyesRent $/month109
move_indateyesMove-in2023-06-01
move_outdateEnded rentals: the day they left. On an active rental, a later date is a scheduled move-out.
paid_throughdateLast day rent is paid for. An active rental needs this or its next bill date.2026-10-31
next_billdateThe day the next rent bill is due (the first day of the next period). Blank = the day after paid-through. On anniversary billing the rental keeps this day of the month (the 31st is billed on the last day of shorter months and back on the 31st after them).2026-11-01
autopayyes / noSwitched back on when the card-on-file is loaded (Card-on-file loader).yes
insurance_plantextThe facility's own plan the tenant is on (its name, from the facility's protection plans). Blank = none, or their own policy below.Basic
insurance_premiummoneyBlank = the plan's price; give it when the tenant pays an older price.
insurance_carriertextThe tenant's own policy (instead of a plan).State Farm
insurance_policytextPolicy #SF-44120
insurance_expiresdatePolicy expires2027-03-31
promotiontextThe promotion's name or code at that facility (Promotions file), when the rental is still getting it.SAVE10
promo_months_leftnumberBilling months still to be discounted. Blank = the promotion's full length.1
deposit_heldmoneyThe security deposit the tenant paid and the facility holds for the move-out. Don't also load the payment that paid it.50
new_rentmoneyA rent change already announced in the old system: the new monthly rent…119
new_rent_fromdate…and the first day of the billing period it starts with (after today).2026-12-01
gate_lockedyes / noLocked out for non-payment in the old system: the code stays off until they pay. A rental past due in the files is locked too.no
notestextNotes

Sample rows (leases.csv – the first 4 of the template's 7):

ref,tenant,facility,unit,status,rent,move_in,move_out,paid_through,next_bill,autopay,insurance_plan,insurance_premium,insurance_carrier,insurance_policy,insurance_expires,promotion,promo_months_left,deposit_held,new_rent,new_rent_from,gate_locked,notes
SAMPLE-L-5001,SAMPLE-T-1001,SAMPLE-FAC-1,D-12,active,109,2023-06-01,,2026-11-30,2026-12-01,yes,,,State Farm,SF-44120,2027-03-31,,,50,119,2027-01-01,no,Rent increase notice mailed in the old system
SAMPLE-L-5006,SAMPLE-T-1001,SAMPLE-FAC-1,L-01,active,39,2026-01-05,,2026-11-30,2026-12-01,no,,,State Farm,SF-44120,2027-03-31,,,,,,no,
SAMPLE-L-5002,SAMPLE-T-1003,SAMPLE-FAC-1,C-201,active,139,2025-02-10,,2026-09-30,2026-12-01,no,Basic,,,,,,,,,,yes,Locked out for non-payment in the old system
SAMPLE-L-5003,SAMPLE-T-1004,SAMPLE-FAC-1,G-1,active,395,2024-05-20,,2026-11-30,2026-12-01,no,Plus,18,,,,SAVE10,1,150,,,no,

Vehicles & boats

What is stored. Matched by tenant + plate/VIN (or make + model when there is neither).

Load after: Tenants.

ColumnTypeRequiredWhat goes in itExample
tenanttextyesRef or email.T-1001
rentaltextThe rental's ref, to tie it to a space (optional).L-5001
kindenum (rv / boat / trailer / car / other)Kindboat
yeartextYear2019
maketextyesMakeGrady-White
modeltextyesModelFreedom 235
length_ftnumberLength ft27
platetextPlate / registrationABC1234
plate_statetextTwo letters.IL
vintextVIN / HIN
colortextColorWhite

Sample rows (vehicles.csv):

tenant,rental,kind,year,make,model,length_ft,plate,plate_state,vin,color
SAMPLE-T-1004,SAMPLE-L-5003,boat,2019,Grady-White,Freedom 235,27,IL 4421 GW,IL,NTLCS123K819,White
SAMPLE-T-1005,SAMPLE-L-5004,rv,2016,Airstream,Flying Cloud 30,30,RV55 TRL,IL,1STJ9AN26GJ5,Silver
SAMPLE-T-1002,SAMPLE-L-4120,trailer,2012,Jayco,Jay Flight 26,26,TR 88120,IL,,Tan

Invoices (history)

Past and open invoices, one row each with its total and what's paid. The ledger shows them exactly as they were. Matched by ref. An open invoice past its due date makes the rental past due (its gate stays locked until paid).

Load after: Rentals (current and past).

ColumnTypeRequiredWhat goes in itExample
reftextyesThe invoice number or id in the old system.INV-20260901-1
rentaltextyesThe rental's ref.L-5001
kindenum (rent / move_in / fees / fee / merchandise / other)rent, move_in, fees or merchandise (fee and other load as fees).rent
issue_datedateyesIssued2026-09-01
due_datedateDue2026-09-01
period_startdatePeriod start2026-09-01
period_enddatePeriod end2026-09-30
descriptiontextOne line; add more lines with the lines JSON column if you have them.Rent – September 2026
totalmoneyyesTotal $133.75
paidmoneyWhat was paid on it. Payments loaded for it count too (the larger of the two).133.75
statusenum (open / paid / void)open, paid, void.paid
linesjsonOptional: [{"kind":"rent","description":"…","amount":125},{"kind":"tax","description":"Sales tax 7%","amount":8.75}]. Kinds: rent, insurance, tax, admin_fee, late_fee, discount, deposit, merchandise, other. Without lines the whole total is one line – give rent and tax apart on an open invoice, or the tax in it isn't reported as sales tax when it's paid here.

Sample rows (invoices.csv – the first 4 of the template's 8):

ref,rental,kind,issue_date,due_date,period_start,period_end,description,total,paid,status,lines
SAMPLE-INV-1001,SAMPLE-L-5001,rent,2026-09-26,2026-10-01,2026-10-01,2026-10-31,Rent – October 2026,109,109,paid,
SAMPLE-INV-1002,SAMPLE-L-5001,rent,2026-10-27,2026-11-01,2026-11-01,2026-11-30,Rent – November 2026,109,109,paid,
SAMPLE-INV-2001,SAMPLE-L-5002,rent,2026-09-26,2026-10-01,2026-10-01,2026-10-31,Rent – October 2026,151,50,open,"[{""kind"":""rent"",""description"":""Rent – October 2026"",""amount"":139},{""kind"":""insurance"",""description"":""Protection plan – Basic"",""amount"":12}]"
SAMPLE-INV-2002,SAMPLE-L-5002,rent,2026-10-27,2026-11-01,2026-11-01,2026-11-30,Rent – November 2026,151,0,open,"[{""kind"":""rent"",""description"":""Rent – November 2026"",""amount"":139},{""kind"":""insurance"",""description"":""Protection plan – Basic"",""amount"":12}]"

Payments (history)

Every payment received, tied to its invoice (or just the rental). A payment pays its invoice up to what the invoice comes to; what's left – or a payment with no invoice – is money on the tenant's account: it pays their next bills, and what's unused can be refunded. Matched by ref.

Load after: Invoices (history).

ColumnTypeRequiredWhat goes in itExample
reftextyesThe payment's id in the old system.PAY-77001
rentaltextyesThe rental's ref.L-5001
invoicetextThe invoice's ref it paid (optional).INV-20260901-1
amountmoneyyesWhat came in (more than 0).133.75
methodenum (card / bank / ach / cash / check / money_order / other)bank = a bank debit (ACH).card
received_atdatetimeyesYYYY-MM-DD HH:MM on the facility's clock (24-hour), an Excel date-time, or a full ISO time with its offset (…Z, …-05:00). A date alone = noon.2026-09-01 10:15
referencetextCheck number, processor id…ch_3Q1…
statusenum (succeeded / refunded / failed)succeeded; refunded = came in and went back; failed = never paid anything.succeeded
notetextNote

Sample rows (payments.csv – the first 4 of the template's 8):

ref,rental,invoice,amount,method,received_at,reference,status,note
SAMPLE-PAY-1,SAMPLE-L-5001,SAMPLE-INV-1001,109,card,2026-10-01 06:02,ch_sample_1001,succeeded,Autopay
SAMPLE-PAY-2,SAMPLE-L-5001,SAMPLE-INV-1002,109,bank,2026-11-01 06:01,py_sample_1002,succeeded,Bank debit (ACH)
SAMPLE-PAY-3,SAMPLE-L-5002,SAMPLE-INV-2001,50,money_order,2026-10-04 15:40,MO 55102,succeeded,Part payment
SAMPLE-PAY-4,SAMPLE-L-5003,SAMPLE-INV-3001,177.42,check,2024-05-20 11:15,#1042,succeeded,

Account credits & prepaid rent

Balances in the tenant's favour, one row each, with its kind. kind = credit is ACCOUNT CREDIT (goodwill, a refund owed as credit): it pays the tenant's next bills and can't be paid out. kind = prepayment is MONEY ON ACCOUNT (rent paid ahead): it pays the next bills too, and what's left is the tenant's – it can be refunded. Prepaid rent is a prepayment. Either is used on each bill as it's issued, so a prepaid tenant is never late. Matched by ref.

Load after: Rentals (current and past).

ColumnTypeRequiredWhat goes in itExample
reftextyesRefCR-9
rentaltextyesThe rental's ref the balance sits on (an ended rental's goes on the tenant's current rental at that facility).L-5001
kindenum (credit / prepayment)credit = account credit, not refundable; prepayment = money paid ahead, refundable. Blank = credit.credit
amountmoneyyesThe balance (more than 0).50
remainingmoneyWhat's left of it, if part was used in the old system. Blank = the full amount. Only what's left is loaded.50
methodenum (cash / check / card / bank / ach / money_order / other)Prepayments: how it was paid (cash, check… – refunds at the counter go back the same way). Blank = other.
descriptiontextDescriptionCredit from previous system
created_atdateWhen it was given or paid in the old system. Blank = the day it's loaded. A prepayment counts as money received that day.2026-08-15

Sample rows (credits.csv):

ref,rental,kind,amount,remaining,method,description,created_at
SAMPLE-CR-1,SAMPLE-L-5003,credit,25,25,,Goodwill credit – gate repair inconvenience,2026-11-06
SAMPLE-PP-1,SAMPLE-L-5006,prepayment,117,117,cash,Locker rent prepaid for 3 months,2026-11-13

Tenant notes

Staff notes on a tenant's file.

Load after: Tenants.

ColumnTypeRequiredWhat goes in itExample
tenanttextyesRef or email.T-1001
bodytextyesNoteCalled about the gate
created_bytextByJess
created_atdatetimeYYYY-MM-DD HH:MM on the facility's clock (24-hour), an Excel date-time, or a full ISO time with its offset.2026-03-04 14:30
pinnedyes / noPinnedno

Sample rows (notes.csv):

tenant,body,created_by,created_at,pinned
SAMPLE-T-1001,Prefers texts; asked about covered parking for a boat next spring.,Jess,2026-03-04 14:30,no
SAMPLE-T-1003,Promised to bring a money order on Friday – call before the lien notice.,Mike,2026-11-14 10:15,yes

Gate codes (vendors & shared)

Codes that aren't a tenant's own (vendors, cleaners, the office). Tenants' codes are on the tenant rows.

Load after: Facilities (corporate).

ColumnTypeRequiredWhat goes in itExample
facilitytextyesFacilityFAC-1
labeltextyesLabelMobile detailer
codetextyes4–10 digits.551234
enabledyes / noEnabledyes
valid_fromdateValid from
valid_untildateValid until

Sample rows (gate_codes.csv):

facility,label,code,enabled,valid_from,valid_until
SAMPLE-FAC-1,Mobile detailer,551234,yes,,
SAMPLE-FAC-1,Cleaning crew,880271,yes,2026-11-01,2027-05-30
SAMPLE-FAC-2,Office – manager,640093,yes,,

Merchandise products & stock

Locks, boxes and supplies with prices and stock on hand. Matched by facility + SKU (or name).

Load after: Facilities (corporate).

ColumnTypeRequiredWhat goes in itExample
facilitytextyesFacilityFAC-1
skutextSKULOCK-DISC
nametextyesNameDisc lock
categorytextCategoryLocks
pricemoneyyesPrice $14.99
costmoneyCost $6.50
taxableyes / noTaxed at the facility's merchandise rate.yes
stocknumberStock on hand36
reorder_levelnumberReorder at10
activeyes / noActiveyes

Sample rows (products.csv – the first 4 of the template's 5):

facility,sku,name,category,price,cost,taxable,stock,reorder_level,active
SAMPLE-FAC-1,LOCK-DISC,Disc lock,Locks,14.99,6.50,yes,36,10,yes
SAMPLE-FAC-1,BOX-M,Medium moving box,Boxes,2.49,0.90,yes,120,40,yes
SAMPLE-FAC-1,BOX-L,Large moving box,Boxes,3.29,1.20,yes,80,30,yes
SAMPLE-FAC-1,TAPE,Packing tape,Supplies,4.99,1.75,yes,48,12,yes

Merchandise sales (history)

Past counter sales, one row per sale with its items as JSON. Matched by ref.

Load after: Merchandise products & stock.

ColumnTypeRequiredWhat goes in itExample
reftextyesRefS-301
facilitytextyesFacilityFAC-1
tenanttextRef or email, blank for walk-ins.T-1001
itemsjsonyes[{"sku":"LOCK-DISC","qty":1,"price":14.99}][{"sku":"LOCK-DISC","qty":1,"price":14.99}]
subtotalmoneyyesSubtotal $14.99
taxmoneyTax $1.31
totalmoneyyesTotal $16.30
methodenum (cash / card / check / account / other)Paid bycard
sold_atdatetimeyesYYYY-MM-DD HH:MM on the facility's clock (24-hour), an Excel date-time, or a full ISO time with its offset.2026-05-12 11:02
sold_bytextSold byJess

Sample rows (sales.csv):

ref,facility,tenant,items,subtotal,tax,total,method,sold_at,sold_by
SAMPLE-S-301,SAMPLE-FAC-1,SAMPLE-T-1001,"[{""sku"":""LOCK-DISC"",""qty"":1,""price"":14.99}]",14.99,1.31,16.30,card,2026-05-12 11:02,Jess
SAMPLE-S-302,SAMPLE-FAC-1,,"[{""sku"":""BOX-M"",""qty"":10,""price"":2.49},{""sku"":""TAPE"",""qty"":2,""price"":4.99}]",34.88,3.05,37.93,cash,2026-11-15 16:45,Mike

Message history

Emails and texts already sent, so the conversation history carries over. Matched by ref.

Load after: Tenants.

ColumnTypeRequiredWhat goes in itExample
reftextyesRefM-1
tenanttextyesRef or email.T-1001
facilitytextyesFacilityFAC-1
channelenum (email / sms)Channelemail
directionenum (out / in)out = sent to the tenant, in = received from them.out
totextEmail address or phone.dana@example.com
subjecttextEmails only.Your September invoice
bodytextyesBodyHi Dana, …
sent_atdatetimeyesYYYY-MM-DD HH:MM on the facility's clock (24-hour), an Excel date-time, or a full ISO time with its offset.2026-09-01 08:00

Sample rows (messages.csv):

ref,tenant,facility,channel,direction,to,subject,body,sent_at
SAMPLE-M-1,SAMPLE-T-1001,SAMPLE-FAC-1,email,out,dana.rivera@example.com,Your November 2026 invoice,"Hi Dana, your November 2026 rent of $109.00 is due on the 1st.",2026-10-27 08:00
SAMPLE-M-2,SAMPLE-T-1003,SAMPLE-FAC-1,sms,in,217-555-0155,,"I can pay Friday, sorry for the delay.",2026-11-14 09:58

Card-on-file (Stripe mapping file)

Links the cards Stripe imported from the previous processor to the tenants here. Upload the mapping file Stripe returns (CSV, Excel or JSON); each old customer id must be a tenant ref (or the tenant's email). Autopay is switched back on for rentals that had it.

Load after: Tenants, Rentals (current and past).

ColumnTypeRequiredWhat goes in itExample
old_customer_idtextyesThe tenant's ref in the old system (Stripe's old_customer_id / old_id).T-1001
customer_idtextyescus_…cus_abc123
source_new_idtextyespm_… (or card_…).pm_1Q2w3e
card_brandtextBrandVisa
card_last4textLast 44242
card_exp_monthnumberExp month9
card_exp_yearnumberExp year2028
rentaltextOptional: the one rental (its ref) whose autopay uses this card. Blank = every current rental of the tenant that had autopay.L-5001
autopayyes / noBlank = yes when the rental had autopay in the old system.

Sample rows (card_methods.csv):

old_customer_id,customer_id,source_new_id,card_brand,card_last4,card_exp_month,card_exp_year,rental,autopay
SAMPLE-T-1001,cus_sample1001,pm_sample1001,Visa,4242,9,2028,,
SAMPLE-T-1004,cus_sample1004,pm_sample1004,Mastercard,5454,3,2029,SAMPLE-L-5003,yes

Website content and pictures

The website builder's content is one JSON file (site.json) – the export of any Bayable site has one, and the help centre's Website builder guide shows the shape. Load it on its own, or zip it together with the pictures: every image in the zip is put in the media library, ready to pick in the builder.

Everything at once

A Bayable export zip can be loaded back into a tenant with Everything from a Bayable export – every table and its history, documents included. Use it to move a tenant between environments or to restore one.

One JSON bundle (assisted migrations)

When Bayable loads a tenant's data for them (Migrations in the super admin – the $299 service), everything pulled from the previous system goes in one JSON file: a corporate block (name, legal_name, email, phone, line1, line2, city, state, zip, timezone) for the company itself, a source block (software, website, exportedAt, notes) for the record, and each loader's rows under its key – facilities, unit_types, units, promotions, tenants, leases, vehicles, card_methods, invoices, payments, credits, notes, sales, messages, gate_codes, products – as arrays of objects whose keys are that loader's template columns (snake_case). Refs point at rows of the earlier objects in the same bundle as they do between files. Sample bundle (JSON) on the Migrations page is a complete one to start from – or let Crawl & build the bundle on the request page make it: Bayable's browser signs in to the previous system with the owner's user, walks it read-only (GET links only; never logout, delete, edit, send, charge – nothing is clicked) and the public website, captures every page's tables and fields, the JSON the pages fetch and the CSV/Excel exports they link to, and maps them to the loaders by their column names ("Customer #, Name, Email, Unit" is tenants; "Unit, Tenant, Rate, Move in" is rentals), splitting names and sizes, turning status words into the loaders' values, tying rentals, invoices, payments and notes to their tenants, and merging list pages with detail pages by ref. Its report says which datasets went where and which couldn't be placed (with their headers, for a person to map), what was filled in from context, and what the loaders' check found. Check only dry-runs every object and reports problems by row; Load for real writes them in order and stops at the first object with a problem – fix those rows and push again, loaded rows are updated by ref, never doubled. Each push is kept as a load report under the tenant's Data loads & exports.

When the previous system's admin keeps a browser out (a "verify you are human" check on the sign-in – Bayable never clicks through one), two other ways make the same bundle through the same mapper, report and check: Or build it from the previous system's export files – sign in yourself, download its exports (tenants, units, rentals or the rent roll, invoices or the ledger, payments, notes, gate codes) as CSV or Excel and give them on the request page; and Or pull it through the previous system's API – for Storable's storEDGE (an API access ID, secret key and the facility's UUID, from storEDGE → Corporate → Settings → API; one-legged OAuth 1.0, read-only GETs on /v1/{facility}/: tenants, ledgers, units, unit groups, unit types, discount plans, the facility's payments, then each ledger's invoices and each tenant's notes) and for SiteLink Web Edition (a corp code, location code, API user name and password from Corporate Control → API Users and Rights; the SOAP CallCenterWs list operations only: SiteInformation, UnitTypePriceList, UnitsInformation, TenantListDetailed, each tenant's LedgersByTenantID, each ledger's ChargesAndPaymentsByLedgerID and TenantNotesRetrieve, DiscountPlans, Promotions). Keys are saved encrypted on the request, tested on save (one light call), never shown back – only replaced or removed – and never written to the log. A pull is a run like a crawl: chunked, stoppable, every answer kept, the bundle built from the answers with the report and check. storEDGE's unit groups become the space types ("10x10 Climate Controlled": size + unit type), its ledgers the rentals (closed → ended, delinquent → active), an invoice is paid when the ledger is paid through past its due date; SiteLink's columns (sFName, dcStdRate, dMovedIn…) are matched by name, canonical first and the rest as named – so look the report's datasets table over.

The website crawl (website builder)

Crawl the website → website builder on a request (or any tenant's Data loads tab, with the address typed) reads the public website page by page and the pictures on it – nothing signed in to, nothing clicked – and proposes what the builder holds: the logo (the header's picture, or anything called a logo, or the icon), the colours (a coloured header is the primary colour and makes the header dark; the first button's colour is the accent), the headline and sub-headline (the home page's first heading and the line under it), the about text (an About page or an "about" heading on the home page), the features (heading + paragraph pairs under "why / features / amenities"), the FAQs (details/summary, dt/dd, "question?" headings), the testimonials (blockquotes and review boxes), the photos (big pictures, biggest first), the footer line, the search-engine title/description/keywords, the social profiles, the phone/email/address/hours, and the pages: /terms, /privacy, posts under /blog, /news, /posts (with their dates), and other pages with a few paragraphs of their own. The card then shows what the forms hold now vs. what was pulled, field by field: ticked by default where the form holds the builder's stock text or nothing, unticked where the owner typed something themselves. Load the ticked fields writes them to the builder's draft only – pictures are copied to the media library (with a Blob store; without one the old addresses are kept and said so), phone/email/ address/hours go to the facility's settings – and the owner publishes from the builder.

Moving your domain (white label)

Every tenant has an address on the platform from day one – <label>.bayable.com – and the admin, the tenant portal and the website all work there. To use your own domain:

  1. Keep the old site running. Nothing changes until DNS does.
  2. In Bayable (Corporate settings → Domains), add the hostname you want, e.g. www.lakesidestorage.com, and tick main address. It is attached to the hosting for you; if a TXT ownership record is asked for, add it too.
  3. At your registrar (GoDaddy, Namecheap, Google Domains…), edit the DNS:
  • for www (or any subdomain): a CNAME record pointing to cname.vercel-dns.com;
  • for the bare domain (lakesidestorage.com): an A record pointing to 76.76.21.21. Remove any old A/CNAME records for the same names first; leave MX (mail) records alone.
  1. Press Check DNS in Domains. It shows "points here" once the change has taken effect (minutes to a day). HTTPS is issued automatically.
  2. The old system's address can be forwarded to the new one at the registrar (a 301 redirect), or left to expire. Emails and texts use the main address from step 2 from then on.

The platform subdomain keeps working alongside your domain, so links already sent don't break.