Bayable

Tenants, rentals, transfers and move-outs

The tenant record and its tabs, office move-ins, editing a rental, transfers that prorate, move-outs you can undo, vehicles, notes and tenants at several facilities.

The tenant record

Facilities → Tenants lists everyone with a current rental (switch to past tenants or search across all). A tenant's page has tabs:

<!-- ── A ── -->

  • General – the account balance (with the Statement) and the Rentals: one card per space with its rent, paid-through date, balance, autopay and insurance, and the buttons Move out, Transfer, Change rent and Promotion – each opens under the card. Details on the card shows the lease number, the signed agreement, billing cycle, gate code, insurance detail (Update insurance / cancel plan, Add a protection plan) and Edit rental. Below them: contact details, address, driver's license, emergency contacts, vehicles and the portal login (send an invite or a reset link). On a phone the balance and the spaces come first. Take Payment at the top of the page is the one way to take a payment.

<!-- ── end A ── --> <!-- ── B (tenant page) ── -->- Ledger – invoices, payments, credits and fees for all their rentals or one space (each row: date, what it is with its service period and memo underneath, charge, payment, running balance, paid through). Take Payment in the header opens the payment window here; the row of buttons has Add Fee, Issue Credit, Waive a Charge, Refund / Write Off and Statement (PDF), and More holds Apply a promotion and Sell merchandise.<!-- ── end B (tenant page) ── -->

  • Payment methods – saved cards and bank accounts (add, remove, make one primary) and Autopay: pick a card, tick the spaces it pays, Save autopay – each space shows which card pays it, and a second card can pay other spaces. A tenant who was blocked from paying online shows one line with Allow online payments.
  • Gate access – the code and whether it's on here (Suspend access here / Restore access here), Re-send code to tenant, Change code (type a new one), which gate systems have it and access per space. Their keypad entries are under Gate → Entries.
  • Documents – everything filed for them: identity & vehicle photos, invoices, receipts, emails, texts, agreements; Request missing documents re-sends the upload link.
  • Notes – staff notes, pinnable to the top.
  • Activity – every change on the account (billing, rentals, gate, messages), by whom and when. Routine gate syncs show only under the Gate filter.
  • Delinquent – appears when they're past due: the stage, the steps applied, and the schedule ahead.

Send a message at the top writes an email or text, with a template picker that fills the tags for this tenant.

Office move-in

Dashboard → Move a Tenant In, Move In on a vacant space or on a tenant, or Move In on a reservation. The move-in goes step by step, with the rail on top showing where you are and a summary beside every step (who, which space, what's chosen and the total due today). Each step is saved as you go: Back or the rail returns to any step done, and a move-in left halfway is listed on the start page to pick up again – or discard.

  1. Tenant – someone new (name, email, mobile, OK to text) or a tenant on file. A reservation already says who. A tenant who owes past due here (on any space, current or left) or has a space in the lien process can't rent another one until that's paid: the screen says how much, with a link to the tenant page to take the payment – then carry on. A balance written off as bad debt doesn't block: the screen says what was written off, when and on which space, and the move-in goes ahead (money taken for it pays this rental; the old debt is recovered only by a payment taken for that space).
  2. Space & rent – the vacant space, the move-in date (today or earlier – reserve for a later date), the rent (blank = the space's rate), a promotion or promo code, and Waive the one-time admin fee (recorded in Activity). A move-in dated in an earlier billing period collects everything owed to date: the first (prorated) period plus each period since, up to the one today falls in, each as its own rent invoice due today. A reservation moved in after its date starts on the day they arrive, or on the reserved date – Settings → Billing → Reservation moved in late – and the reserved date shows next to the field. When the facility offers prepay discounts, Prepay picks months to pay ahead at a percent off: they start with the bill after the move-in bill (the first, prorated month isn't part of them), are added to Due today and must be paid in full with the move-in – see Prepay in Billing. When the facility takes security deposits, Security deposit shows the space type's amount – type another, or 0 for none; it's its own line on the move-in bill, held until the move-out (account credit on the tenant's account can't pay it – money can).
  3. Details – what the space needs. Every rental: mailing address, driver's license (number, state, expiry, date of birth) and an emergency contact. Vehicle spaces (parking, covered, enclosed, slips) also take the vehicle, boat or RV, its registration (expiry) and its insurance (carrier, policy, expiry). Drive-up, interior and locker spaces ask nothing about a vehicle. A tenant on file has everything filled in to check.
  4. Protection & extras – the protection plan or the tenant's own insurance (a renter's or homeowner's policy for a storage space; the vehicle's policy for a vehicle space), merchandise they're taking (locks, boxes – added to the total and to their ledger; shown only when merchandise is switched on for the facility and in your plan), their gate code (or a random one) and notes.
  5. Agreement & documents – the step lists what the tenant signs: the rental agreement, plus the protection plan agreement when they chose a plan, or the insurance waiver when they keep their own insurance. One signature covers all of them. Three ways to get it signed: Sign here today (turn the screen; they tick the box and type their name), Send All to Sign when they aren't signing today (emails – and texts – a page where they read and sign every agreement, today or later, then photograph their documents: the driver's license, plus the insurance card and registration on a vehicle space), or Print All Documents – each agreement on its own page with the tenant's and rental's details and signature lines; once they sign the paper, tick The tenant signed the printed copy and Record Paper Signature (keep the paper in your files). You don't wait: continue to the payment while they sign – the screen updates by itself when the signature or photos arrive. You can also add a photo yourself.
  6. Payment – card on file, a new card (typed into the card form on the page, with the mailing address on file as the billing address or another one; save it for autopay), <!-- ── B (tenant page) ── -->the card terminal or the cash, check, money order and bank transfer methods your facility accepts (Settings → Billing)<!-- ── end B (tenant page) ── -->, or pay later (the invoice stays open; turn the gate code on anyway if you choose). Due today is the whole balance of the rental: the move-in bill (with a reservation fee credited on it – a fee bigger than the bill leaves the rest as account credit on the rental, counted here against what's due), a backdated move-in's months to date, the merchandise, and anything the reservation already owed – its reservation fee if unpaid, a lock bought on it – because a payment pays those first; collecting it all leaves the move-in paid in full. The gate code goes on only when the move-in bill (and a backdated move-in's earlier months) is paid in full – at the counter, or later: the payment that finishes paying it switches the code on, sends it to this facility's gate and sends the welcome with it. A smaller payment, a lock added or a fee doesn't open the gate before that. If the tenant pays less, tick turn the gate code on anyway to let them in. A card is charged first and refunded automatically if the move-in can't be saved.
  7. Moved in – the rental is active, the move-in and merchandise invoices are on the ledger, the gate code is on once paid, and the notices go out: the welcome with the gate code, the receipt, and – if anything is still outstanding – the link to sign and upload. The screen shows the gate code, the payment, the paperwork status (with Resend to Sign and Print Documents) and what was sent.

Reservations

To hold a space for someone before they move in: Spaces → Reserve a space (or the Reserve button on a vacant space). Pick the space, the tenant (new or on file), the move-in date, how long to hold it (the facility's Reservation hold days under Settings → Billing & Agreement, 7 by default), the rent, a protection plan and a promotion if any. The reservation fee, when the facility charges one, is billed on its own invoice.

Facilities → Reservations lists every hold: who, which space, hold-until date, and whether the fee is paid. From there Move In turns the reservation into a move-in (the space, tenant and rent are already filled in), Cancel releases the space (a paid fee is refunded or kept as the facility decides), and Send confirmation re-sends the tenant their reservation email. A hold that passes its date shows hold expired and the nightly job releases the space. Online reservations from the website land on the same page, as do online move-ins that are paid but dated later.

Editing a rental

<!-- ── A ── --> On the General tab, a space card's Details → Edit rental changes the rent directly, the protection plan or the tenant's own policy, and the lease notes; Promotion on the card lists the live promotions that fit the space, each with what it takes off (First month free – $129.00 off the next rent bill) – pick one and Apply; a running promotion shows under the rent with the months left, and Remove takes it off (see Promotions). The gate code is changed on the Gate access tab. <!-- ── end A ── -->

Change rent (on the space card) schedules a new rent with the billing period it starts with. A rent increase can't start sooner than the facility's notice – Settings → Billing → Notice for a rent increase, 30 days by default, as the default rental agreement promises – so the periods too soon are greyed out. An increase needs notice the tenant can be shown to have had: tick Send the tenant the rent change notice to email it (and text it when they agreed to texts), or enter the date you gave them written notice (a letter, a notice handed over) – the notice period then runs from that day. Without either, an increase isn't scheduled, and if the notice can't be sent (no email on file, the template switched off) the increase isn't scheduled either – give written notice and enter its date; the rate shows the change coming (→ $110.00 from Jan 1), whether the notice went, and Cancel change. Bills for that period on use the new rent – one already issued for it is changed straight away, paid or not (anything paid over a lower rent goes back on the account) – and the rental's rate becomes the new one on the day. One change can be scheduled at a time: entering another while one is scheduled shows what saving does – This replaces the change to $90.00 from Dec 1; invoice #1002 goes back to the current rent (a bill the old change had already re-priced goes back unless the new change covers its period, when it takes the new rent) – and asks you to tick Replace the scheduled change before it goes; setting the current rent again cancels it the same way, with its tick. The reply says what was called off and which bills changed. A transfer or move-out cancels a scheduled change. Settings → Billing → Allow rent changes on current rentals (on by default) turned off hides Change rent and refuses new changes; a change already scheduled still happens on its date (or cancel it with Cancel change). Rate changes are logged in Activity and in the rent-change reports; the tenant sees the coming rent in the portal.

Transfers

Transfer moves a rental to another vacant space and prorates the rent difference for the rest of this period, already paid from the transfer date, on the period's own billed length (a February anniversary period is 28 days) – with sales tax on it at the rate the bill was taxed at:

  • To a dearer space – the days left in this period are charged on an invoice due with the next rent bill (the rental's next bill date): it draws no late fee before then, and you can still collect it at once – the flow lands on the payment screen. Credit and money already on the account pay it first. A later period already billed and paid gets its difference on its own bill (so a move-out before that period gives that whole bill back).
  • To a cheaper space – the difference plus the tax paid on it comes back: first off a charge from an earlier transfer, paid or not (voided if it's covered in full, otherwise reduced – what it no longer needs goes back), then off this period's own paid bill (negative rent and tax lines dated today, so rent and sales tax reports are right); a later period already paid is re-priced on its own bill. A bill that owes only a late fee counts as paid for this (its rent is). What comes back goes the way it was paid: money paid on the bill comes back as money on the account – never more than was paid in money – and account credit used on it comes back as credit (never as cash) (it pays the next bill or can be refunded).
  • Bills for later periods move to the new space with the tenant, paid or not; the bill for the period the transfer falls in stays where it was billed. A second transfer in the same period, or a plan cancelled with its unused days credited, works from that period's bill, wherever it is.
  • Back into a space they left by transfer in the last month – the rent goes back to what they paid there (unless you type a rent), so a move there and back only costs the days actually spent in the other space.
  • Rent already invoiced for a later period – paid or not, even when an earlier bill is open again (a bounced check, a charge added to it) – is re-priced to the new rate, with its tax re-done on the whole bill at its own rate and the promotion it was billed with following the rent (one replaced since included); a promotion that doesn't apply to the new space comes off. A month that was waived stays waived.
  • A promotion for certain space types goes along only to a space it applies to – even in its last month; otherwise it stops with the old space.
  • Account credit on the old rental moves with the tenant, including credit a bill hands back later.

A prepay goes with the tenant: the new rental keeps the percent and the months left, at the new space's rent – the rent difference for the rest of this month is worked at the percent too, and a later month already billed has its prepay discount worked again on the new rent. The money paid ahead follows the tenant; paid at the old rent, it may run out a little sooner (a dearer space) or leave some over (a cheaper one).

A transfer can't be dated before the tenant moved in, and a rental in the lien process can't be transferred until the balance is paid and the lien case is closed. The new rental keeps the billing cycle the old one was on, and reports count the move as a transfer (the rent roll keeps the first move-in date). The gate code stays the same; the old space becomes vacant at once. A move-out scheduled on the old space moves with the tenant to the new one (the transfer screen says so beforehand) – cancel it on the new rental if their plans changed. If a check that paid the old space bounces later, the rent it reopens is owed on the space the tenant has now, so notices, late fees and autopay follow it.

Move-outs

<!-- ── A ── -->Move out on the space card (tenant page) or Move-out on the space page is one short form: the date (today, or a future date, which schedules it) and the reason side by side (a note is optional – required for Other). Once both are in, a summary of what will happen and what is still owed shows right above Confirm Move-Out (or Confirm Scheduled Move-Out); nothing happens before that click. A scheduled move-out shows on the card, with Cancel scheduled move-out under Move out.<!-- ── end A ── --> What happens: the rental ends, the space becomes vacant, the code stops working at this facility's gates once the tenant has no space left here (a tenant who still rents at another facility keeps it there), and the move-out confirmation is sent. Rent already invoiced for a period that starts on or after the move-out date is cancelled: an unpaid invoice is voided, and a paid one too, with the money going back on the account (account credit and promotion months used on it are restored as credit and months). The month they leave in isn't prorated – unless Settings → Billing → Refund the unused days of the last month at move-out is on (see below). Any other open balance stays on the ledger and shows in the Open balances on moved-out accounts report. Leftover account credit moves to the tenant's other current space at this facility; it can be cleared only when they have none. If another clerk moved or transferred the tenant a moment earlier, the move-out says so instead of reporting success.

A move-out can't be dated before the day the rental started (a slip like Oct 12 for Nov 12 is refused). A completed move-out can be undone for 24 hours as long as the space is still vacant and not reserved: the rental goes back to active and the space to occupied; the rent bills cancelled at move-out come back as they were (hand discounts, plan, promotion, the account credit they used), paid again from the money handed back; credit cleared after the move-out comes back as credit; and anything written off as bad debt is owed again. Undone the same day, a cancelled bill is simply open again. Undone the next day – the morning after a month end – the cancelled bill stays cancelled on the day it was (a closed day or month never changes) and a fresh copy with a new number, dated the day of the undo, takes its place: the same lines and period, paid from the same money. The ledger shows both; the reports count the cancellation in one month and the re-issued bill in the next. Its standing is its own: a moved-out space that owes nothing is current (steps cleared); one still owing keeps the stage it reached. The gate code is switched back on only for a tenant in good standing – one locked out for non-payment stays locked until they pay.

A prepay that ends early. Moving out before a prepay's last day takes back the discount given on every month billed in it (the move-out month too) – one invoice of its own dated the day the move-out is done, Prepay discount taken back, taxed like rent; the move-out screen shows it before you confirm. The prepaid months after the move-out are cancelled like any month billed ahead, their money comes back on the account and pays that invoice first; the rest can be refunded. Moving out on or after the last prepaid day takes nothing back.

Unused days refunded at move-out (Settings → Billing, off by default). Rent is charged up to the day before the move-out date: a tenant moving out on Oct 20 used Oct 1–19, and Oct 20–31 are the unused days. With the setting on, a move-out partway through a period that's paid (or part paid) gives back those days' rent and protection plan – by the day, on the period's length as a move-in's first month is prorated (a 31-day October: 12/31 of the month) – less any promotion or discount on that bill in the same proportion, plus the sales tax on them at the bill's rate. It goes on that period's bill as negative lines (Unused days refunded – …) dated the day the move-out is done. What was paid in money comes back as money on the account – never more than was paid in money – which you then pay out with Refund… on the ledger; what was paid with account credit comes back as credit. On a part-paid bill it first comes off what's still owed. Fees, merchandise and a bill nothing was paid on aren't refunded. After a transfer earlier in the same month, the days are refunded at the rent paid for them now (a dearer move's charge for those days comes off that charge). The move-out screen shows the refund before you confirm. Undo move-out charges the refund again and pays it from the same money and credit. Turning the setting off later leaves refunds already given as they are.

The security deposit at move-out (Settings → Billing → Security deposits). The move-out screen shows the deposit held and, as you type, what it pays, what you keep and what goes back. After the move-out's other steps (cancelled bills, an unused-days refund, a prepay's discount taken back), the deposit pays what the rental still owes – oldest due first, rent and tax before fees, so the tax counts as collected that day; you can keep part of it for cleaning or damage (amount and a reason – booked as Deposit kept, other income, untaxed); the rest goes back on the account as money the tenant can be refunded with Refund… on the ledger (until then the nightly run can use it on their other open bills, like any money on the account). A part of the deposit never paid is cancelled. A scheduled move-out (or a lien sale's) keeps nothing – the deposit pays what's owed and the rest is refundable. Everything is dated the day the move-out is done. Undo move-out puts the deposit back exactly: the bills it paid are owed again, the part kept is given back, and the same payments hold it again (money refunded since can't come back – that part of the deposit is owed again).

Tenants can also give notice from the portal (Moving out?), which schedules the move-out and tells you on the dashboard.

Vehicles and boats

Each rental on a vehicle space carries what's stored: year, make, model, length, plate or hull number, and the registration and insurance with their expiry dates (storage spaces have none). Expiring insurance drives the reminders and the insurance reports (Insurance); the vehicle-documents request after move-in asks for whatever is still missing.

Notes and emergency contacts

Notes are free text with the author and time; pin the important one. Emergency contacts (name, relationship, phone, email) are kept on the tenant and asked for at online move-in.

Tenants at more than one facility

A tenant can rent at several of your facilities. On a facility's tenant page their other facility's space shows with a view only label (no move-out, transfer or autopay controls there), the balance due is this facility's with the other shown separately, and a payment taken here pays only this facility's rent. Switch facilities to work on the other rental.

Past tenants

There is no delete tenant button: a tenant is never deleted or removed, because their ledger, invoices and signed documents are records the facility must keep. To end a tenancy, move the rental out (above); the tenant then shows under the Moved out filter and stays searchable. A tenant record created by mistake with no rental can simply be left – it never appears in billing or reports.

A moved-out tenant keeps their record, ledger and documents. Their portal login is switched off some days after move-out and their uploaded files purged later, as set under Corporate settings → Data (retention); invoices, payments, rentals and messages are always kept. Moving in again with the same email restores the account.